I inform about type approval certification for Bluetooth devices in Indonesia based on kepdir 09/dirjen/2004 about bluetooth technical requirements. Bluetooth is a wireless network system with the information intended as a sender and receiver of data information, with the allocati0n of frequency  for bluetooth in 2.4 - 2.4835 GHz.

Bluetooth technical requirements in the testing device as follows:

A. Frequency allocation for bluetooth devices 2.4 - 2.4835 GHz.

B. Out power: (Power Class)

• Power Class 1. Maximum out power: 100 mW (20dBm), Nominal Output Power: N / A, Minimum Output: 1 mW (0 dBm), Power Control: 4 to +20 dBm-30 to 0dBm, Optional
• Power Class 2. Maximum out power: 2.5 mW (4 dBm), Nominal Output Power: 1 mW (0 dBm), Minimum Output: 0:25 mW (-6 dBm), Power Control: -30 to 0 dBm, Optional
• Power Class 3. Maximum out power: 1 mW (0 dBm), Nominal Output Power: N / A, Minimum Output: N / A, Power Control: -30 to 0 dBm, Optional

C. Spread spectrum is permitted Frequency Hopping Spread Spectrum (FHSS) or Direct Sequence Spread Spectrum (DSSS).

D. Effective Radiated Power ? -10 dBW (100 mW) EIRP.

E. Modulation Characteristics:

1. Modulation = Gaussian Frequency Shift Keying (GFSK)
2. Modulation index = 0.32 ± 1%
3. BT = 0.5 ± 1%
4. Bit Rate = 1 Mbps ± 1 ppm
5. Modulation data = PRBS9
6. Frequency Accuracy = ± 1 ppm

F. Spurious emissions refers to the ETSI 300 328.

G. Bluetooth devices must be qualified by the Bluetooth Qualification Body (BQB).

For information testing cost equipment, you can see here.